MR-160 Imaging Moisture Meter with IGM by FLIR

SKU MR160
$599.00
In stock
1
Product Details

The FLIR MR160 is the only moisture meter with the power to show you where to measure the problem. Featuring Infrared Guided Measurement (IGM) technology powered by a FLIR Lepton® thermal imaging sensor, MR160 helps you quickly see temperature patterns that point to potential hidden moisture so you know right where to place the meter probe to capture accurate readings.

TROUBLESHOOT QUICKLY

Easily investigate insulation and moisture issues using MR160's pinless technology or external pin probe for both non-destructive and contact measurements.

IDENTIFY AND VERIFY MOISTURE ISSUES WITH ONE TOOL

MR160 is your go-to troubleshooting tool right out of the box: Identify cold spots with the built-in, 80x60-resolution thermal imager to locate areas of moisture. Verify the actual moisture level using the meter's pin and pinless moisture measurement functionality. Capture thermal images and moisture readings on one screen, then generate reports with free FLIR Tools software.

PORTABLE, TOUGH, DURABLE

The rugged design, small form factor, and internal rechargeable battery makes the FLIR MR160 a convenient tool to carry with you wherever you need it.

Model Number MR160
Thermal Imaging
Thermal Imaging Detector FLIR Lepton microbolometer
Image Calibration Automatic
Thermal Image Resolution 4800 pixels (80 × 60)
Spectral Response 8–14 μm
Field of View 51° × 38°
Thermal Sensitivity < 0.15 °C
Image Frame Rate 9 Hz
Image Display Color Moisture Alert
Minimum Focus Distance 10 cm (4”)
Show less...
Moisture Measurement
Pin Moisture via External Probe Range (Accuracy) 0–100% WME (± 5%)
Pin Moisture Groups 9 material groups
Pinless Moisture Range 0–100 relative measurement
Pinless Measurement Depth 0.75" (19mm) Max
Measurement Resolution 0.1
Response Time Pinless 100 ms
Response Time Pin Mode 750 ms
General Information
Display Type QVGA (320 x 240 pixel) 2.3” 64k color TFT
Saved Image File format BMP with measurement values overlaid
Stored Image Capacity 9999 images
Laser Orientation Single laser pointer to center of thermal image
Power Requirements Integrated rechargable battery
Battery Power - Continuous Run Time / Typical Usage 18 hours max / 4 work weeks
Battery 3.7 V, 3000 mAh Li-ion rechargeable via micro USB
Drop Test 9.8’ (3m)
Certification Standards EN61326 (EMC), EN61010 (Battery + Charger), EN60825-1 Class 2 (Laser)
Agency Approvals FCC Class B, CE, UL
Warranty 2 Yr Product, 10 Yr Thermal Detector
Save this product for later